Huwei modes for One For All Remote
I've a TalkTalk Plus Huawei DN372T and a One For All remote control.
I asked One For All for a vode for the DN372, they replied saying:
-----------------------------
Please find below detailed information about your device and the setup code, as well as instructions on how to proceed further:
If your Huawei is in its default mode normally the code 2994 should work properly.
Please note : If your device is in mode 2 or mode 3 and if you still have the original remote working you can normally switch back to the default mode ( please refer to Huawei manual to get the proper procedure).
-------------------------
My remote control only accepts Cable 2994, not the others. With that code it will not control my DN372T .
But the manuals I have found give to clue as to how to return to a default mode, they do not mention a mode 2 or a mode 3.
Dose anyone know the answer to this, please?
I asked One For All for a vode for the DN372, they replied saying:
-----------------------------
Please find below detailed information about your device and the setup code, as well as instructions on how to proceed further:
BRAND | MODEL NUMBER | BASIC CODE | CODE IN LOAD |
|---|---|---|---|
| Huawei | DN372T (default mode) | Cable 2994 | Yes |
| Huawei | DN372T (mode 2) | Cable 2995 | No |
| Huawei | DN372T (mode 3) | Cable 2996 | No |
If your Huawei is in its default mode normally the code 2994 should work properly.
Please note : If your device is in mode 2 or mode 3 and if you still have the original remote working you can normally switch back to the default mode ( please refer to Huawei manual to get the proper procedure).
-------------------------
My remote control only accepts Cable 2994, not the others. With that code it will not control my DN372T .
But the manuals I have found give to clue as to how to return to a default mode, they do not mention a mode 2 or a mode 3.
Dose anyone know the answer to this, please?
0