Studying causal mechanisms is hard. One of the best ways we know to study if one cause works better or worse when another one is present is through a two-by-two experiment. As its name suggests, the design involves two overlapping two-arm experiments.
Before conducting studies of this kind, researchers often want to increase their confidence in their ability to detect significant interactions when the effect of \(Z_1\) on \(Y\) really is a function of \(Z_2\). How many subjects are needed to raise the probability of correctly inferring that there is an interaction 80%?
This is a surprisingly difficult question to answer, because answering it accurately depends upon the specific model of the potential outcomes the researcher has in mind. As a result, many researchers use rules of thumb that may lead to systematic over- or under-confidence. Using the MIDA framework and design simulation, however, we can provide a flexible answer to this question that does not rely on rules of thumb.
Model:
We specify \(Z_1\) and \(Z_2\) do not have any effect on the outcome when only one of the causal agents becomes present. When both are present the combination of the causal factors produces an increase of 1/10th of a standard deviation in the outcome.
Inquiry:
We can express the effect of \(Z_A\) when \(Z_B\) is present as \(\tau_{Z_A \mid Z_B} = E[(Y \mid Z_A = 1, Z_B = 1) - (Y \mid Z_A = 0, Z_B = 1)]\), and the effect of \(Z_1\) when \(Z_2\) is absent as \(\tau_{Z_A \mid \neg Z_B} = E[(Y \mid Z_A = 1, Z_B = 0) - (Y \mid Z_A = 0, Z_B = 0)]\). Thus, our estimand is \(\tau_{Z_A \mid Z_B} - \tau_{Z_A \mid \neg Z_B}\): the difference in the effect of \(Z_A\) induced by moving \(Z_B\) from 0 to 1. Our design also features estimands that involve a weighted average of \(\tau_{Z_A \mid Z_B}\) and \(\tau_{Z_A \mid \neg Z_B}\) (with equivalent expressions for the effect of \(B\)). We’re going to weight the average so that our non-interaction estimands are equivalent to the effect of each treatment when the other one is absent.
Data strategy:
We randomly assign an equal number of subjects to one of four conditions, by blocking the assignment of \(B\) on the assignment of \(A\). In the first both causal factors are absent, in the second and third only \(A\) or \(B\) is present, respectively, and in the fourth both are present.
Answer strategy:
We estimate the interaction effect using a linear regression model that focuses on the coefficient on the \(Z_A \times Z_B\) term.
N <- 100
prob_A <- 0.5
prob_B <- 0.5
weight_A <- 0
weight_B <- 0
mean_A0B0 <- 0
mean_A0B1 <- 0
mean_A1B0 <- 0
mean_A1B1 <- 0.1
sd_i <- 1
outcome_sds <- c(0, 0, 0, 0)
population <- declare_population(N, u = rnorm(N, sd = sd_i))
potential_outcomes <- declare_potential_outcomes(Y_A_0_B_0 = mean_A0B0 +
u + rnorm(N, sd = outcome_sds[1]), Y_A_0_B_1 = mean_A0B1 +
u + rnorm(N, sd = outcome_sds[2]), Y_A_1_B_0 = mean_A1B0 +
u + rnorm(N, sd = outcome_sds[3]), Y_A_1_B_1 = mean_A1B1 +
u + rnorm(N, sd = outcome_sds[4]))
estimand_1 <- declare_inquiry(ate_A = weight_B * mean(Y_A_1_B_1 -
Y_A_0_B_1) + (1 - weight_B) * mean(Y_A_1_B_0 - Y_A_0_B_0))
estimand_2 <- declare_inquiry(ate_B = weight_A * mean(Y_A_1_B_1 -
Y_A_1_B_0) + (1 - weight_A) * mean(Y_A_0_B_1 - Y_A_0_B_0))
estimand_3 <- declare_inquiry(interaction = mean((Y_A_1_B_1 -
Y_A_1_B_0) - (Y_A_0_B_1 - Y_A_0_B_0)))
assign_A <- declare_assignment(A = complete_ra(N, prob = prob_A))
assign_B <- declare_assignment(B = block_ra(prob = prob_B,
blocks = A))
reveal_Y <- declare_reveal(Y_variables = Y, assignment_variables = c(A,
B))
estimator_1 <- declare_estimator(Y ~ A + B, model = lm_robust,
term = c("A", "B"), inquiry = c("ate_A", "ate_B"), label = "No_Interaction")
estimator_2 <- declare_estimator(Y ~ A + B + A:B, model = lm_robust,
term = "A:B", inquiry = "interaction", label = "Interaction")
two_by_two_design <- population + potential_outcomes + estimand_1 +
estimand_2 + estimand_3 + assign_A + assign_B + reveal_Y +
estimator_1 + estimator_2
diagnosis <- diagnose_design(two_by_two_design, sims = 25)
## Warning: We recommend you choose a higher number of simulations than 25 for the
## top level of simulation.
Inquiry | Term | Bias | RMSE | Power | Coverage | Mean Estimate | SD Estimate | Mean Se | Type S Rate | Mean Estimand |
---|---|---|---|---|---|---|---|---|---|---|
ate_A | A | 0.07 | 0.18 | 0.00 | 1.00 | 0.07 | 0.17 | 0.20 | NaN | 0.00 |
(0.03) | (0.02) | (0.00) | (0.00) | (0.03) | (0.02) | (0.00) | NA | (0.00) | ||
ate_B | B | 0.09 | 0.18 | 0.00 | 1.00 | 0.09 | 0.16 | 0.20 | NaN | 0.00 |
(0.03) | (0.02) | (0.00) | (0.00) | (0.03) | (0.02) | (0.00) | NA | (0.00) | ||
interaction | A:B | -0.01 | 0.45 | 0.12 | 0.88 | 0.09 | 0.46 | 0.40 | 0.33 | 0.10 |
(0.09) | (0.08) | (0.07) | (0.07) | (0.09) | (0.08) | (0.01) | NA | (0.00) |
Wow, the power is really low for our interaction! It’s only 12%. That’s because our estimator has to take account of the variation in both effects when estimating their difference. Note that the standard deviation of the interaction estimates is twice that of the estimates of the main effects.
We also see that our estimates of the main effects are biased: we set out to estimate the effect of each treatment when the other was absent, but half the time the other treatment was present, so we get a boost in the estimated effect size due to the interaction.
Alter the answer strategy so that the estimates of the main effects are no longer biased.
Use expand_designs()
with the two_by_two_designer()
to determine the minimal interaction that can be detected with 80% power, holding other parameters constant.
Alter the template so that outcomes are binary instead of normally distibuted. What is the expected standard error for the interaction term for a sample size of 1000? Discuss the implications of your diagnosis for practice.
Murray, David M. 1998. Design and Analysis of Group-Randomized Trials. Vol. 29. Monographs in Epidemiology & B.