Comments
-
I'm quite sure this can be done more easily, but hopefully this approach will help some people.
-
Thankyou for pasting the actual sequence we needed to generate, that was the key :)
-
AND IT ONLY BLOODY WORKS! Piers, you are a God among men. To summarise: 1) Log in at http://members.harmonyremote.com/ 2) Go to http://members.harmonyremote.com/Easy.... Select your device, then click "Manual" and enter the following text in the box at the bottom - this is a wrong Pronto code, but we need to put something…
-
OK, I've generated the string that I think gives the right output:…
-
I'm not having any luck with byte ordering, but there is a sort of intermediate format on the Harmony site that looks like: F948DP2307S1176P0228S0228P0228S0228P0228S0228 This is showing the pulses and spaces in hex, so I should be able to take Piers' listing above, convert it to this, and paste it in by hand halfway…
-
I thought it might be something like that, thanks for confirming. I'll try varying the byte ordering and see if I can get it to generate right.
-
This is the display on the Harmony site that I get when loading in the code converted without the space. Make sense to anyone?
-
I tried just the last 6 digits in the 16-bit format, but still no luck.
-
I just tried to regenerate the Pronto code, and realised that it also generates as a 16 bit code, so I'm going to give that a go.
-
No good here either. However, I have no idea at what stage it went wrong, and I don't think I have the right kit to debug. Will try again from scratch later if I get chance.
-
After converting to the Pronto code, I've followed the instructions at http://forums.logitech.com/t5/Harmony... for adding the Pronto code to the harmony remote, and it seems to have accepted it, but I'm not at home at the moment, so I can't try it out. Will have a go later on this evening if I can though.
-
Piers, that's fantastic. As someone using a Logitech programmable remote, I'd dearly love any information you could give us.
-
Thanks for reducing the number of button presses in the latest update, but I still think this needs more work and a single-button access. Here's hoping you can work something out for the next update!
-
This is a great first update, thanks Youview! The interface to choose where playback should start was an especially nice surprise. Single best thing though is the channel hiding, thanks a million for that :)
-
This would be great - like Keith, I've got a sequence programmed into my Harmony remote to do this, but it's slow and brittle. A key or remote code would be great!
-
Nice one, thanks. I'll see what comes in the next release and add my vote to those other feature requests. I had considered trying to fool the box by resetting it and tethering it to my phone for setup, but it would probably work it out when connected back to the main network. :)